몬스터 헌터 라이즈: 선브레이크 (Monster Hunter Rise + Sunbreak)
Microsoft Windows · Lenovo Legion Y700 Gen 3 · GameNative · 성능 등급 미흡
emulog 설정 해석
| 구성 | Lenovo Legion Y700 Gen 3 + GameNative |
|---|---|
| 에뮬레이터 빌드 | 1.2.1 |
| 그래픽 드라이버 | [Mr. Purple Turnip] turnip_mrpurple_T30-toasted.adpkg |
| 기재된 설정 항목 | 24개 (기본값과 다르게 바꾼 항목 10개) |
| 성능 등급 | 미흡 |
기본값에서 조정된 항목: 에뮬레이터 버전, Wine 버전, 오디오 드라이버, 동적 드라이버 버전, 그래픽 드라이버, DX Wrapper 설정 (버전, 프레임 속도, 최대 메모리).
등급 판단 근거
이 게임에 등급이 기재된 보고 12건 가운데 이 조합보다 높은 등급은 8건(67%), 같은 등급은 0건입니다. 동일 에뮬레이터(GameNative)로 다른 기기에서 올라온 보고는 7건입니다. 작성자 코멘트 원문은 2,409자입니다.
같은 에뮬레이터의 다른 기기 결과
- Retroid Pocket 6 — 완벽
- AYN Thor Max — 훌륭함
- Lenovo Legion Y700 Gen 4 — 훌륭함
- AYANEO KONKR Pocket FIT (G3 Gen 3) — 훌륭함
- AYN Thor Max — 플레이 가능
세팅값
| 항목 | 설정값 |
|---|---|
| 컨테이너 변형 | bionic |
| 에뮬레이터 버전 | 1.2.1 |
| Wine 버전 | proton-10.0-arm64ec |
| 해상도 (화면 크기) | 1280x720 (16:9) |
| 오디오 드라이버 | pulse |
| Steam 유형 | normal |
| 동적 드라이버 버전 | [Mr. Purple Turnip] turnip_mrpurple_T30-toasted.adpkg (배포 파일: turnip_mrpurple_T30-toasted.adpkg.zip) |
| 그래픽 드라이버 | Turnip (Adreno) |
| DX 래퍼 | DXVK |
| DXVK 버전 | 2.6.1-gplasync |
| DX Wrapper 설정 (버전, 프레임 속도, 최대 메모리) | Graphics Driver = Wrapper |
| 최대 장치 메모리 | 4096 |
| Adrenotools Turnip 사용 | 켜짐 |
| 시작 선택 | Essential (Load only essential services) |
| 32비트 에뮬레이터 | fex |
| 64비트 에뮬레이터 | fex |
| Box64 버전 | 0.3.6 |
| Box64 프리셋 | compatibility |
| FEXCore 버전 | 2609 |
| FEXCore 프리셋 | extreme |
| DirectInput 매퍼 유형 | standard |
| DirectInput API 활성화 | 켜짐 |
| XInput API 활성화 | 켜짐 |
| Steam Input 사용 | 꺼짐 |
작성자 코멘트(인용)
아래 코멘트는 EmuReady 사용자가 작성한 원문이며, emulog 은 한국어 번역과 위 해석만 추가했습니다.
🎮 인터랙티브 버전으로 열기I was able to get this game running at 720 x 30 FPS and the Low Graphics Settings, but I kept running into issues where the controller would lock up halfway through a hunt and I'd have to close out of the game. I found a report of something similar on the GameNative discord and tried to use the suggested dinput.dll and dinput8.dll fix, but they did not solve the issue. I then tried the suggestion to use an updated version of proton-10 from a different EmuReady post but I was unable to even boot the game. I'm not really sure what the issue is and information about the bug and how to fix it is limited so I gave up trying to get it to work. However, the game does seem to work fine through the new app called DroidDeck so if you are desperate to play it you can try doing so there (Also the online features worked). **Tablet's Performance Report:** Tablet's Game Assistant Mode: Balanced Mode Tablet's Screen Refresh Rate Mode: Extreme (120-165 Hz) Average CPU Usage: 2.04 GHz (Default Speed) Average GPU Usage: 366 MHz (High Speed) Average RAM Usage: 9-10 GB (Out of 12GB) Average Frame Rate: 30 FPS (Capped in the in-game settings) Average Battery Temperature: 35-40 C (High Temps) Average Power Draw: 4-6 W (Medium Power) **General Notes about the Lenovo Y700 Gen3:** With this device, the most limiting factor to performance is the heat management. This device lacks any sort of fan or any other form of active cooling, as such is the case, it struggles to maintain a suitable internal temperature of below 40C/104F when running at max performance. To minimize heat damage to your device I highly suggest that you use several setting to limit it's performance and power draw while gaming. Settings such as; using Standard Mode for the Screen Refresh Rate (60Hz Mode), activating Balanced Mode in Game Assistant to limit CPU clock speed (0.67-2.04GHz CPU speed), limiting game resolution to 720p x 30 FPS for 3D games and 720p x 60 FPS for 2D games, using the lowest in-game graphical settings, and using the latest Turnip Drivers and Android Bionics (arm64ec) components. Using some or all of these tweaks will allow the tablet to keep it's power draw under 7 Watts, which will allow it to maintain a healthy 35-40 C internal temperature. To monitor the tablet's Wattage I use an app called Wattz, and for all other metrics I use the floating icons provided by Lenovo Game Assistant.