파이널 판타지 VII 박스아트

파이널 판타지 VII (Final Fantasy VII)

Microsoft Windows · Lenovo Legion Y700 Gen 3 · GameNative · 성능 등급 완벽

emulog 설정 해석

구성Lenovo Legion Y700 Gen 3 + GameNative
에뮬레이터 빌드0.9.1
그래픽 드라이버[StevenMXZ] Turnip v26.0.0 - M1
기재된 설정 항목23개 (기본값과 다르게 바꾼 항목 8개)
성능 등급완벽

기본값에서 조정된 항목: 에뮬레이터 버전, Wine 버전, 오디오 드라이버, 동적 드라이버 버전, 그래픽 드라이버, DXVK 버전.

등급 판단 근거

이 게임에 등급이 기재된 보고 7건 가운데 이 조합보다 높은 등급은 0건(0%), 같은 등급은 3건입니다. 동일 에뮬레이터(GameNative)로 다른 기기에서 올라온 보고는 3건입니다. 작성자 코멘트 원문은 2,479자입니다.

같은 에뮬레이터의 다른 기기 결과

세팅값

항목설정값
컨테이너 변형bionic
에뮬레이터 버전0.9.1
Wine 버전proton-10.0-arm64ec
해상도 (화면 크기)1280x720 (16:9)
오디오 드라이버pulse
Steam 유형normal
동적 드라이버 버전[StevenMXZ] Turnip v26.0.0 - M1 (배포 파일: Turnip_v26.0.0_M1.zip)
그래픽 드라이버Turnip (Adreno)
DX 래퍼DXVK
DXVK 버전other
최대 장치 메모리0
Adrenotools Turnip 사용켜짐
시작 선택Essential (Load only essential services)
32비트 에뮬레이터fex
64비트 에뮬레이터fex
Box64 버전0.3.6
Box64 프리셋performance
FEXCore 버전2603
FEXCore 프리셋intermediate
DirectInput 매퍼 유형standard
DirectInput API 활성화켜짐
XInput API 활성화켜짐
Steam Input 사용꺼짐

작성자 코멘트(인용)

아래 코멘트는 EmuReady 사용자가 작성한 원문이며, emulog 은 한국어 번역과 위 해석만 추가했습니다.

이 게임은 매우 느리게 실행되지만, 이는 태블릿이나 에뮬레이터의 문제가 아닙니다. PS1 원본에 충실하려다 보니 전투 시 15 FPS 제한 등 현대적인 환경에서 다루기 어려운 제약이 많습니다. 대부분의 유저는 7th Heaven Mod를 사용해 문제를 해결합니다. 컨테이너에 접근해 모드를 추가할 수 있지만 과정이 복잡해 직접 시도하지 않았습니다. 이 게임은 720p·60FPS에서 가볍게 실행됩니다. **태블릿 성능 보고서:** - 게임 어시스턴트 모드: Balanced Mode - 화면 주사율 모드: Extreme (120‑165 Hz) - 평균 CPU 사용량: 0.67 GHz(최소) → 화면 전환 시 2.04 GHz(기본) - 평균 GPU 사용량: 231 MHz(기본) - 평균 프레임 레이트: 모든 구역에서 제한에 도달함 + 전투·전체 영화 컷신: 15 FPS + 오버월드: 30 FPS + 메뉴: 60 FPS - 평균 온도: 30‑35 °C(중간) - 평균 전력 소모: 2‑4 W(매우 낮음) - 주요 구성 요소 버전: + turnip26.0.0_R8_mem + DXVK 2.6.2-arm64ec-gplasync-1 **Lenovo Y700 Gen3 일반 참고:** 이 기기의 가장 큰 제약은 열 관리입니다. 팬이나 액티브 냉각이 없어 최대 성능 시 40 °C/104 °F 이하를 유지하기 어렵습니다. 열 손상을 최소화하려면 다음 설정을 권장합니다: 화면 주사율을 Standard Mode(60 Hz)로, 게임 어시스턴트는 Balanced Mode로 CPU 클럭(0.67‑2.04 GHz) 제한, 3D 게임은 720p·30 FPS, 2D 게임은 1080p·60 FPS 해상도 제한, 최저 그래픽 옵션 사용, 최신 Turnip 드라이버와 Android Bionics(arm64ec) 적용. 이러한 조합으로 전력 소모를 7 W 이하로 유지해 내부 온도 35‑40 °C를 유지할 수 있습니다. 전력 모니터링은 Wattz 앱을, 기타 지표는 Lenovo Game Assistant의 플로팅 아이콘을 사용합니다.

This game runs like dog-water, but that isn't any fault of the tablet or the emulator. This game is doing its best to be faithful to the PS1 release, but that means it has a bunch of limitations that are hard to deal with in modern times, such as a 15 FPS cap while in combat. When playing this game most people use the 7th Heaven Mod set to fix a lot of the games issues. It is possible to add these Mods to the game through accessing the Container, but the process seems pretty complicated so I didn't give it a try myself. This game is lightweight and easy to run at 720p x 60 FPS. **Tablet's Performance Report:** Tablet's Game Assistant Mode: Balanced Mode Tablet's Screen Refresh Rate Mode: Extreme (120-165 Hz) Average CPU Usage: 0.67 GHz (Minimum Speed), but it jumps up to 2.04 GHz (Default Speed) when switching between different screens due to the difference in frame-rate caps. Average GPU Usage: 231 MHz (Default Speed) Average Frame Rate: This device will easily hit the frame-rate caps for all of the various sections. + Combat & Full-Movie Cut-scenes: 15 FPS + Over-world: 30 FPS + Menus: 60 FPS Average Temperature: 30 C-35 C (Medium Temps) Average Power Draw: 2-4 W (Very Low Power) Specific Component Versions: + turnip26.0.0_R8_mem + DXVK 2.6.2-arm64ec-gplasync-1 **General Notes about the Lenovo Y700 Gen3:** With this device, the most limiting factor to performance is the heat management. This device lacks any sort of fan or any other form of active cooling, as such is the case, it struggles to maintain a suitable internal temperature of below 40C/104F when running at max performance. To minimize heat damage to your device I highly suggest that you use several setting to limit it's performance and power draw while gaming. Settings such as; using Standard Mode for the Screen Refresh Rate (60Hz Mode), activating Balanced Mode in Game Assistant to limit CPU clock speed (0.67-2.04GHz CPU speed), limiting game resolution to 720p x 30 FPS for 3D games and 1080p x 60 FPS for 2D games, using the lowest in-game graphical settings, and using the latest Turnip Drivers and Android Bionics (arm64ec) components. Using some or all of these tweaks will allow the tablet to keep it's power draw under 7 Watts, which will allow it to maintain a healthy 35-40C internal temperature. To monitor the tablet's Wattage I use an app called Wattz, and for all other metrics I use the floating icons provided by Lenovo Game Assistant.

🎮 인터랙티브 버전으로 열기