
Microsoft Windows · Lenovo Legion Y700 Gen 3 · GameNative · 성능 등급 훌륭함
| 구성 | Lenovo Legion Y700 Gen 3 + GameNative |
|---|---|
| 에뮬레이터 빌드 | 1.0.0 |
| 그래픽 드라이버 | [Mr. Purple Turnip] turnip_mrpurple_T28-toasted.adpkg |
| 기재된 설정 항목 | 24개 (기본값과 다르게 바꾼 항목 9개) |
| 성능 등급 | 훌륭함 |
기본값에서 조정된 항목: 에뮬레이터 버전, Wine 버전, 오디오 드라이버, 동적 드라이버 버전, 그래픽 드라이버, DXVK 버전.
이 게임에 등급이 기재된 보고 3건 가운데 이 조합보다 높은 등급은 0건(0%), 같은 등급은 2건입니다. 작성자 코멘트 원문은 1,958자입니다.
| 항목 | 설정값 |
|---|---|
| 컨테이너 변형 | bionic |
| 에뮬레이터 버전 | 1.0.0 |
| Wine 버전 | proton-10.0-arm64ec |
| 해상도 (화면 크기) | 1280x720 (16:9) |
| 오디오 드라이버 | pulse |
| Steam 유형 | normal |
| 동적 드라이버 버전 | [Mr. Purple Turnip] turnip_mrpurple_T28-toasted.adpkg (배포 파일: turnip_mrpurple_T28-toasted.adpkg.zip) |
| 그래픽 드라이버 | Turnip (Adreno) |
| DX 래퍼 | DXVK |
| DXVK 버전 | other |
| DX Wrapper 설정 (버전, 프레임 속도, 최대 메모리) | Graphics Driver = Wrapper |
| 최대 장치 메모리 | 0 |
| Adrenotools Turnip 사용 | 켜짐 |
| 시작 선택 | Essential (Load only essential services) |
| 32비트 에뮬레이터 | fex |
| 64비트 에뮬레이터 | fex |
| Box64 버전 | 0.3.6 |
| Box64 프리셋 | compatibility |
| FEXCore 버전 | 2603 |
| FEXCore 프리셋 | extreme |
| DirectInput 매퍼 유형 | standard |
| DirectInput API 활성화 | 켜짐 |
| XInput API 활성화 | 켜짐 |
| Steam Input 사용 | 꺼짐 |
아래 코멘트는 EmuReady 사용자가 작성한 원문이며, emulog 은 한국어 번역과 위 해석만 추가했습니다.
🎮 인터랙티브 버전으로 열기처음에는 부팅에 어려움이 있었으나, 이 설정으로 720p x 30 FPS로 안정적으로 구동됩니다 (성능 최대 설정 시 40-50 FPS가 나오므로, 가장 부드러운 경험을 위해 30 FPS로 제한했습니다). 초기에 블랙 스크린으로 부팅되지만, 잠시 기다리면 정상적으로 실행됩니다. **태블릿 성능 보고서:** 태블릿 Game Assistant 모드: Balanced Mode 태블릿 화면 주사율 모드: Standard (60 Hz) 평균 CPU 사용량: 2.04 GHz (기본 속도) 평균 GPU 사용량: 310+ MHz (고속) 평균 프레임 레이트: 30 FPS 평균 배터리 온도: 30 C-35 C (보통) 평균 전력 소모: 4-6 W (보통) 특정 컴포넌트 버전: + DXVK 2.6.2-arm64ec-gplasync-1 (외부에서 다운로드하여 앱으로 가져옴) **Lenovo Y700 Gen3 관련 일반 참고 사항:** 이 기기의 성능상 가장 큰 제약 요소는 발열 관리입니다. 팬이나 다른 형태의 액티브 쿨링 시스템이 없기 때문에, 최대 성능으로 구동 시 내부 온도를 40C/104F 이하로 유지하는 데 어려움이 있습니다. 기기의 열 손상을 최소화하기 위해, 게임 중 성능과 전력 소모를 제한하는 여러 설정을 사용할 것을 강력히 권장합니다. 권장 설정은 다음과 같습니다: 화면 주사율 Standard Mode (60Hz Mode) 사용, Game Assistant에서 Balanced Mode를 활성화하여 CPU 클럭 제한 (0.67-2.04GHz), 3D 게임은 720p x 30 FPS, 2D 게임은 720p x 60 FPS로 해상도 제한, 인게임 그래픽 설정을 최하로 설정, 최신 Turnip Drivers 및 Android Bionics (arm64ec) 컴포넌트 사용. 이러한 최적화를 일부 또는 모두 적용하면 전력 소모를 7 Watts 미만으로 유지하여 내부 온도를 35-40 C의 건강한 상태로 유지할 수 있습니다. 태블릿의 전력 소모량은 Wattz 앱으로 모니터링하며, 다른 모든 지표는 Lenovo Game Assistant에서 제공하는 플로팅 아이콘을 사용합니다.
I had some trouble getting this game to boot initially but with these settings the game is able to run at a solid 720p x 30 FPS without much effort (Max out performance gets 40-50 FPS so I just capped it at 30 for the smoothest experience). The game boots into a black screen initially, but if you have some patients it should boot up. **Tablet's Performance Report:** Tablet's Game Assistant Mode: Balanced Mode Tablet's Screen Refresh Rate Mode: Standard (60 Hz) Average CPU Usage: 2.04 GHz (Default Speed) Average GPU Usage: 310+ MHz (High Speed) Average Frame Rate: 30 FPS Average Battery Temperature: 30 C-35 C (Medium Temps) Average Power Draw: 4-6 W (Medium Power) Specific Component Versions: + DXVK 2.6.2-arm64ec-gplasync-1 (Found offsite and imported into the app) **General Notes about the Lenovo Y700 Gen3:** With this device, the most limiting factor to performance is the heat management. This device lacks any sort of fan or any other form of active cooling, as such is the case, it struggles to maintain a suitable internal temperature of below 40C/104F when running at max performance. To minimize heat damage to your device I highly suggest that you use several setting to limit it's performance and power draw while gaming. Settings such as; using Standard Mode for the Screen Refresh Rate (60Hz Mode), activating Balanced Mode in Game Assistant to limit CPU clock speed (0.67-2.04GHz CPU speed), limiting game resolution to 720p x 30 FPS for 3D games and 720p x 60 FPS for 2D games, using the lowest in-game graphical settings, and using the latest Turnip Drivers and Android Bionics (arm64ec) components. Using some or all of these tweaks will allow the tablet to keep it's power draw under 7 Watts, which will allow it to maintain a healthy 35-40 C internal temperature. To monitor the tablet's Wattage I use an app called Wattz, and for all other metrics I use the floating icons provided by Lenovo Game Assistant.