Sly Cooper and the Thievius Raccoonus 박스아트

Sly Cooper and the Thievius Raccoonus

Sony PlayStation 2 · Retroid Pocket Flip 2 - SD · ARMSX2 · 성능 등급 훌륭함

emulog 설정 해석

구성Retroid Pocket Flip 2 - SD + ARMSX2
에뮬레이터 빌드1.0.8
기재된 설정 항목33개 (기본값과 다르게 바꾼 항목 3개)
성능 등급훌륭함

기본값에서 조정된 항목: 에뮬레이터 버전, 업스케일, 평균 FPS.

등급 판단 근거

이 게임에 등급이 기재된 보고 8건 가운데 이 조합보다 높은 등급은 2건(25%), 같은 등급은 0건입니다. 작성자 코멘트 원문은 787자입니다.

세팅값

항목설정값
화면 비율16:9
사용자 지정 FPS 제한60
에뮬레이터 버전1.0.8
빠른 부팅켜짐
FXAA꺼짐
인터레이스 모드Automatic
렌더러Auto
텍스처 필터링PS2 (default)
업스케일2
안티 블러켜짐
자동 플러시 (하드웨어)Disabled
자동 플러시 (소프트웨어)켜짐
바이리니어 업스케일링Bilinear (Smooth)
블렌딩 정확도Basic
CAS 모드None (Default)
디더링Unscaled (Default)
하드웨어 밉맵핑켜짐
정수 업스케일링꺼짐
화면 오프셋꺼짐
오버스캔 표시꺼짐
텍스처 프리로딩Full
트라이리니어 필터링Automatic
Vsync꺼짐
CPU 코어Translator (default)
Fast CDVD꺼짐
INTC 스핀 감지켜짐
인스턴트 VU1켜짐
VU 스레드 (MTVU)켜짐
대기 루프 감지켜짐
mVU 플래그 해킹켜짐
EE 사이클 레이트 (언더클럭)100% (0)
EE 사이클 스킵 (오버클럭)Normal (0)
평균 FPS60 (ocassional slowdown during intense moments)

작성자 코멘트(인용)

아래 코멘트는 EmuReady 사용자가 작성한 원문이며, emulog 은 한국어 번역과 위 해석만 추가했습니다.

**IMPORTANT NOTE:** RP5/Flip 2에서 TheBanner412 OC 펌웨어를 사용하세요. GPU 클럭 상승으로 성능이 크게 향상됩니다. FW169를 사용하고 FW189는 피하세요(터치스크린 문제). 드라이버는 위와 동일합니다. 2배 해상도로 대부분 60FPS를 유지하며, 파티클이 많은 장면(인트로 로켓 시퀀스)에서만 약간의 프레임 저하가 있지만 충분히 감당 가능합니다.

**IMPORTANT NOTE: I am using TheBanner412 OC firmware for RP5/Flip 2. This is important as performance in this particular game benefits greatly from the increased GPU clock speed, which isn't always the case. Download the firmware [here](https://github.com/The412Banner/Banners-No-PC-Retroid-Overclock). If you have a Flip 2 use FW169 not FW189 as it will cause touchscreen issues.** Driver: [Mesa Turnip driver v24.3.0 - Revision 9v2](https://github.com/K11MCH1/AdrenoToolsDrivers/releases?q=9v2&expanded=true) You can use 2x resolution and will experience full speed 60 FPS during most gameplay with slowdowns only during intense sequences with lots of particles, such as the rocket sequence at the end of the intro level although I would consider this slowdown to be very tolerable.

🎮 인터랙티브 버전으로 열기