
Microsoft Windows · Lenovo Legion Y700 Gen 3 · GameNative · 성능 등급 훌륭함
| 구성 | Lenovo Legion Y700 Gen 3 + GameNative |
|---|---|
| 에뮬레이터 빌드 | 1.0.0 |
| 그래픽 드라이버 | [Mr. Purple Turnip] turnip_mrpurple_T28-toasted.adpkg |
| 기재된 설정 항목 | 24개 (기본값과 다르게 바꾼 항목 11개) |
| 성능 등급 | 훌륭함 |
기본값에서 조정된 항목: 에뮬레이터 버전, Wine 버전, 오디오 드라이버, 동적 드라이버 버전, 그래픽 드라이버, DX 래퍼.
이 게임에 등급이 기재된 보고 1건 가운데 이 조합보다 높은 등급은 0건(0%), 같은 등급은 0건입니다. 작성자 코멘트 원문은 2,190자입니다.
| 항목 | 설정값 |
|---|---|
| 컨테이너 변형 | bionic |
| 에뮬레이터 버전 | 1.0.0 |
| Wine 버전 | proton-10.0-arm64ec |
| 해상도 (화면 크기) | 1280x720 (16:9) |
| 오디오 드라이버 | pulse |
| Steam 유형 | normal |
| 동적 드라이버 버전 | [Mr. Purple Turnip] turnip_mrpurple_T28-toasted.adpkg (배포 파일: turnip_mrpurple_T28-toasted.adpkg.zip) |
| 그래픽 드라이버 | Turnip (Adreno) |
| DX 래퍼 | VKD3D |
| DXVK 버전 | other |
| DX Wrapper 설정 (버전, 프레임 속도, 최대 메모리) | Graphics Driver = "Wrapper" |
| 최대 장치 메모리 | 0 |
| Adrenotools Turnip 사용 | 켜짐 |
| 시작 선택 | Essential (Load only essential services) |
| 32비트 에뮬레이터 | fex |
| 64비트 에뮬레이터 | fex |
| Box64 버전 | 0.3.6 |
| Box64 프리셋 | compatibility |
| FEXCore 버전 | 2605 |
| FEXCore 프리셋 | extreme |
| DirectInput 매퍼 유형 | standard |
| DirectInput API 활성화 | 켜짐 |
| XInput API 활성화 | 켜짐 |
| Steam Input 사용 | 꺼짐 |
아래 코멘트는 EmuReady 사용자가 작성한 원문이며, emulog 은 한국어 번역과 위 해석만 추가했습니다.
🎮 인터랙티브 버전으로 열기이 게임은 원래 DirectX 11을 사용했지만 업데이트로 DirectX 12도 지원합니다. 원하는 버전을 선택하세요. - DirectX 11: DX Wrapper = DXVK; Launch Command = -dx11 - 그래픽 오류가 적지만 전력 소모가 더 큽니다. - DirectX 12: DX Wrapper = VKD3D, Version 3.0.1-0, Feature Level = 12_2 - 그래픽 오류가 약간 있지만 DirectX 11 대비 TDP가 3 W 낮습니다. 게임이 60 FPS에 도달하기 어려워 40 FPS로 제한했습니다. **태블릿 성능 보고서:** - Game Assistant Mode: Balanced Mode - 화면 주사율 모드: Extreme (120‑165 Hz) - 평균 CPU 사용량: 2.04 GHz (기본 속도) - 평균 GPU 사용량: 366 MHz (고속) - 평균 RAM 사용량: 7‑8 GB / 12 GB - 평균 FPS: 40 (제한) - 평균 배터리 온도: 30‑35 °C (중간) - 평균 전력 소모: 6‑8 W (고전력) - 구성 요소 버전: DXVK 2.6.2-arm64ec-gplasync-1 (이하 Lenovo Y700 Gen3 일반 참고는 이전 항목과 동일)
Initially this game used DirectX11 but was updated to DirectX12 with an update. It works in both modes so it is up to you which one you want to use. + DirectX 11 - Use DX Wrapper = DXVK; Launch Command = -dx11 + This version has less graphical errors, but more power used. + DirectX 12 - Use DX Wrapper = VKD3D, Version 3.0.1-0, Feature Level = 12_2 + This version had some graphical errors, but uses 3 less TDP than when running in DirectX 11. This game struggles to get 60 so I just capped in to 40 FPS. **Tablet's Performance Report:** Tablet's Game Assistant Mode: Balanced Mode Tablet's Screen Refresh Rate Mode: Extreme (120-165 Hz) Average CPU Usage: 2.04 GHz (Default Speed) Average GPU Usage: 366 MHz (High Speed) Average RAM Usage: 7-8 GB (Out of 12GB) Average Frame Rate: 40 FPS (Capped) Average Battery Temperature: 30-35 C (Medium Temps) Average Power Draw: 6-8 W (High Power) Specific Component Versions: + DXVK 2.6.2-arm64ec-gplasync-1 (Found offsite and imported into the app) **General Notes about the Lenovo Y700 Gen3:** With this device, the most limiting factor to performance is the heat management. This device lacks any sort of fan or any other form of active cooling, as such is the case, it struggles to maintain a suitable internal temperature of below 40C/104F when running at max performance. To minimize heat damage to your device I highly suggest that you use several setting to limit it's performance and power draw while gaming. Settings such as; using Standard Mode for the Screen Refresh Rate (60Hz Mode), activating Balanced Mode in Game Assistant to limit CPU clock speed (0.67-2.04GHz CPU speed), limiting game resolution to 720p x 30 FPS for 3D games and 720p x 60 FPS for 2D games, using the lowest in-game graphical settings, and using the latest Turnip Drivers and Android Bionics (arm64ec) components. Using some or all of these tweaks will allow the tablet to keep it's power draw under 7 Watts, which will allow it to maintain a healthy 35-40 C internal temperature. To monitor the tablet's Wattage I use an app called Wattz, and for all other metrics I use the floating icons provided by Lenovo Game Assistant.