
Microsoft Windows · Lenovo Legion Y700 Gen 3 · GameNative · 성능 등급 플레이 가능
| 구성 | Lenovo Legion Y700 Gen 3 + GameNative |
|---|---|
| 에뮬레이터 빌드 | 1.0.0 |
| 그래픽 드라이버 | [Mr. Purple Turnip] turnip_mrpurple_T28-toasted.adpkg |
| 기재된 설정 항목 | 24개 (기본값과 다르게 바꾼 항목 10개) |
| 성능 등급 | 플레이 가능 |
기본값에서 조정된 항목: 에뮬레이터 버전, Wine 버전, 오디오 드라이버, 동적 드라이버 버전, 그래픽 드라이버, DXVK 버전.
이 게임에 등급이 기재된 보고 1건 가운데 이 조합보다 높은 등급은 0건(0%), 같은 등급은 0건입니다. 작성자 코멘트 원문은 2,023자입니다.
| 항목 | 설정값 |
|---|---|
| 컨테이너 변형 | bionic |
| 에뮬레이터 버전 | 1.0.0 |
| Wine 버전 | proton-10.0-arm64ec |
| 해상도 (화면 크기) | 1280x720 (16:9) |
| 오디오 드라이버 | pulse |
| Steam 유형 | normal |
| 동적 드라이버 버전 | [Mr. Purple Turnip] turnip_mrpurple_T28-toasted.adpkg (배포 파일: turnip_mrpurple_T28-toasted.adpkg.zip) |
| 그래픽 드라이버 | Turnip (Adreno) |
| DX 래퍼 | DXVK |
| DXVK 버전 | other |
| DX Wrapper 설정 (버전, 프레임 속도, 최대 메모리) | Wrapper v2 |
| 최대 장치 메모리 | 0 |
| Adrenotools Turnip 사용 | 켜짐 |
| 시작 선택 | Essential (Load only essential services) |
| 32비트 에뮬레이터 | fex |
| 64비트 에뮬레이터 | fex |
| Box64 버전 | 0.3.6 |
| Box64 프리셋 | compatibility |
| FEXCore 버전 | 2605 |
| FEXCore 프리셋 | extreme |
| DirectInput 매퍼 유형 | standard |
| DirectInput API 활성화 | 켜짐 |
| XInput API 활성화 | 켜짐 |
| Steam Input 사용 | 꺼짐 |
아래 코멘트는 EmuReady 사용자가 작성한 원문이며, emulog 은 한국어 번역과 위 해석만 추가했습니다.
🎮 인터랙티브 버전으로 열기이 게임은 태블릿을 최대 성능으로 끌어올립니다. 첫 레벨에서 720p·40-50 FPS를 구동할 때 GPU가 최대 속도로 올라가 TDP가 14 W에 달해 태블릿이 빠르게 과열됩니다. 그래픽을 Low로 낮추고 FPS를 30으로 제한하면 TDP가 지속 가능한 7 W로 감소하지만, 맵에 따라 성능 차이가 있을 수 있습니다. **Tablet's Performance Report:** Tablet's Game Assistant Mode: Performance Mode Tablet's Screen Refresh Rate Mode: Standard (60 Hz) Average CPU Usage: 3.05 GHz (Max Speed) Average GPU Usage: 310 - 900+ MHz (High Speed) Average Frame Rate: 30 FPS Average Battery Temperature: 35-40 C (High Temps) Average Power Draw: 7-10 W (Very High Power) Specific Component Versions: + DXVK 2.6.2-arm64ec-gplasync-1 (Found offsite and imported into the app) **General Notes about the Lenovo Y700 Gen3:** 이 기기의 가장 큰 제약은 열 관리입니다. 팬이나 다른 액티브 냉각 장치가 없어 최대 성능 시 40 C/104 F 이하의 내부 온도를 유지하기 어렵습니다. 열 손상을 최소화하려면 화면 주사율을 Standard Mode(60 Hz)로 사용하고, Game Assistant에서 Balanced Mode를 활성화해 CPU 클럭을 0.67-2.04 GHz로 제한하며, 3D 게임은 720p·30 FPS, 2D 게임은 720p·60 FPS로 해상도를 제한하고, 최저 그래픽 설정을 사용하며, 최신 Turnip 드라이버와 Android Bionics(arm64ec) 구성 요소를 적용하세요. 이러한 조합으로 전력 소모를 7 W 이하로 유지하면 내부 온도를 35-40 C 수준으로 건강하게 유지할 수 있습니다. 전력 소모를 모니터링하려면 Wattz 앱을, 기타 지표는 Lenovo Game Assistant의 플로팅 아이콘을 사용합니다.
This game pushes the tablet to its maximum performance. At 720p x 40-50 FPS in the first level the GPU rocketed up to max speed and the TDP was at 14 W, which overheated the tablet pretty quickly. I drop the graphics to low and limited the FPS to 30 with the GameNative sidebar setting and the TDP lowered to a sustainable 7 W, but performance will probably vary per map as some can get very large. **Tablet's Performance Report:** Tablet's Game Assistant Mode: Performance Mode Tablet's Screen Refresh Rate Mode: Standard (60 Hz) Average CPU Usage: 3.05 GHz (Max Speed) Average GPU Usage: 310 - 900+ MHz (High Speed) Average Frame Rate: 30 FPS Average Battery Temperature: 35-40 C (High Temps) Average Power Draw: 7-10 W (Very High Power) Specific Component Versions: + DXVK 2.6.2-arm64ec-gplasync-1 (Found offsite and imported into the app) **General Notes about the Lenovo Y700 Gen3:** With this device, the most limiting factor to performance is the heat management. This device lacks any sort of fan or any other form of active cooling, as such is the case, it struggles to maintain a suitable internal temperature of below 40C/104F when running at max performance. To minimize heat damage to your device I highly suggest that you use several setting to limit it's performance and power draw while gaming. Settings such as; using Standard Mode for the Screen Refresh Rate (60Hz Mode), activating Balanced Mode in Game Assistant to limit CPU clock speed (0.67-2.04GHz CPU speed), limiting game resolution to 720p x 30 FPS for 3D games and 720p x 60 FPS for 2D games, using the lowest in-game graphical settings, and using the latest Turnip Drivers and Android Bionics (arm64ec) components. Using some or all of these tweaks will allow the tablet to keep it's power draw under 7 Watts, which will allow it to maintain a healthy 35-40 C internal temperature. To monitor the tablet's Wattage I use an app called Wattz, and for all other metrics I use the floating icons provided by Lenovo Game Assistant.