
Microsoft Windows · Lenovo Legion Y700 Gen 3 · GameNative · 성능 등급 완벽
| 구성 | Lenovo Legion Y700 Gen 3 + GameNative |
|---|---|
| 에뮬레이터 빌드 | 0.8.1 |
| 그래픽 드라이버 | [KIMCHI Turnip] v26.0.0 - Revision 8 + super beta 8xx support |
| 기재된 설정 항목 | 25개 (기본값과 다르게 바꾼 항목 13개) |
| 성능 등급 | 완벽 |
기본값에서 조정된 항목: 에뮬레이터 버전, Wine 버전, 오디오 드라이버, 동적 드라이버 버전, 그래픽 드라이버, DX 래퍼.
이 게임에 등급이 기재된 보고 17건 가운데 이 조합보다 높은 등급은 0건(0%), 같은 등급은 7건입니다. 동일 에뮬레이터(GameNative)로 다른 기기에서 올라온 보고는 5건입니다. 작성자 코멘트 원문은 2,579자입니다.
| 항목 | 설정값 |
|---|---|
| 컨테이너 변형 | bionic |
| 에뮬레이터 버전 | 0.8.1 |
| Wine 버전 | proton-10.0-arm64ec |
| 해상도 (화면 크기) | 1280x720 (16:9) |
| 오디오 드라이버 | pulse |
| Steam 유형 | normal |
| 동적 드라이버 버전 | [KIMCHI Turnip] v26.0.0 - Revision 8 + super beta 8xx support (배포 파일: turnip_a8xx.zip) |
| 그래픽 드라이버 | Turnip (Adreno) |
| DX 래퍼 | VKD3D |
| DXVK 버전 | other |
| DX Wrapper 설정 (버전, 프레임 속도, 최대 메모리) | Wrapper V2 | 60 FPS |
| 최대 장치 메모리 | 4096 |
| Adrenotools Turnip 사용 | 켜짐 |
| 시작 선택 | Essential (Load only essential services) |
| 32비트 에뮬레이터 | fex |
| 64비트 에뮬레이터 | fex |
| Box64 버전 | 0.3.6 |
| Box64 프리셋 | compatibility |
| FEXCore 버전 | 2601 |
| FEXCore 프리셋 | extreme |
| DirectInput 매퍼 유형 | standard |
| DirectInput API 활성화 | 켜짐 |
| XInput API 활성화 | 켜짐 |
| Steam Input 사용 | 꺼짐 |
| 평균 FPS | 60 |
아래 코멘트는 EmuReady 사용자가 작성한 원문이며, emulog 은 한국어 번역과 위 해석만 추가했습니다.
[중요 공지] 이 게임은 720p·60FPS, 고 그래픽 설정의 Balanced Mode에서 총 전력소모 3-5W로 실행 가능해 태블릿이 시원하고 배터리 소모가 적음. 새 스테이지 로드 시 가끔 FPS가 떨어지지만 대부분 60FPS를 유지함. 문제는 Balanced Mode에서 블루투스 컨트롤러 지연이 눈에 띄게 증가한다는 점. Performance Mode에서는 60FPS 고정이며 지연이 없지만 전력소모가 8-10W로 40°C 이상 위험 온도에 근접한다. 현재 Balanced Mode에서도 저지연 블루투스 모드를 강제 적용하는 방법을 조사 중이며, 발견하면 댓글에 남길 예정. **태블릿 성능 보고서:** Game Assistant Mode: {{Balanced Mode}} 및 [[Performance Mode]] Screen Refresh Rate Mode: {{[[Extreme (120 Hz)]]}} Average CPU Usage: {{0.67‑1.64 GHz}} 및 [[3.05 GHz (Max)]] Average GPU Usage: {{[[231 MHz]]}} Average Frame Rate: {{[[60 FPS]]}} Average Temperature: {{30‑35 °C (중간)}} 및 [[35‑40 °C (높음)]] Average Power Draw: {{3‑5 W}} 및 [[8‑10 W]] Component Versions: + turnip26.0.0_R8 + VKD3D 2.14.1, Feature Level 12_1 **Lenovo Y700 Gen3 일반 참고:** (전과 동일) 열 관리가 가장 큰 제약이며, 전력·성능 제한 설정을 권장함.
**[Important Notice]** This game can run in Balanced Mode at High Graphical Settings at 720p x 60 fps and it will have a Total Power Draw of 3-5 Watts. This will allow the tablet to stay cool and will be light on the battery. The game performs at a nearly lock 60 fps with only occasional dips when loading into a new stage, but that tends to happen on Performance Mode as well. The only problem that I had was that my Bluetooth Controller Latency was noticeably worse on Balanced Mode. At Performance Mode the game is a locked 60 fps and I didn't experience any latency issues, but the Total Power Draw skyrockets to 8-10 Watts, which is the ceiling for the tablet before it starts to get to dangerous internal temperatures of >40 C. I'm currently looking into how to force the low-latency Bluetooth mode into working while in Balanced Mode and if I find anything I'll leave it in the comments. **Tablet's Performance Report:** Tablet's Game Assistant Mode: {{Balanced Mode}} and [[Performance Mode]] Tablet's Screen Refresh Rate Mode: {{[[Extreme (120 Hz)]]}} Average CPU Usage: {{0.67 - 1.64 GHz}} and [[3.05 GHz (Max)]] Average GPU Usage: {{[[231 MHz]]}} Average Frame Rate: {{[[60 FPS]]}} Average Temperature: {{30 C-35 C (Medium Temps)}} and [[35-40 C (High Temps)]] Average Power Draw: {{3-5 W}} and [[8-10 W]] Specific Component Versions: + turnip26.0.0_R8 + VKD3D 2.14.1, Feature Level 12_1 **General Notes about the Lenovo Y700 Gen3:** With this device, the most limiting factor to performance is the heat management. This device lacks any sort of fan or any other form of active cooling, as such is the case, it struggles to maintain a suitable internal temperature of below 40C/104F when running at max performance. To minimize heat damage to your device I highly suggest that you use several setting to limit it's performance and power draw while gaming. Settings such as; using Standard Mode for the Screen Refresh Rate (60Hz Mode), activating Balanced Mode in Game Assistant to limit CPU clock speed (0.67-2.04GHz CPU speed), limiting game resolution to 720p x 30 FPS for 3D games and 1080p x 60 FPS for 2D games, using the lowest in-game graphical settings, and using the latest Turnip Drivers and Android Bionics (arm64ec) components. Using some or all of these tweaks will allow the tablet to keep it's power draw under 7 Watts, which will allow it to maintain a healthy 35-40C internal temperature. To monitor the tablet's Wattage I use an app called Wattz, and for all other metrics I use the floating icons provided by Lenovo Game Assistant.